Here's some important info about this .blend:
    
    1. The rig was created using Auto Rig Pro. If you don't have this addon, please install the
    "rig_tools" addon included with the file to use properly.
    
    2. The objects in the "Normals_Controller_Meshes" folder are linked via the Data Transfer
    modifier to the actual objects and must remain in the scene for the normals to work correctly. 
    Note: the controller meshes are exact copies of the actual meshes with their modifiers applied
    and so any changes to the actual meshes (e.g. increasing the subsurf amount) will break the 
    link and the normals.

    3. The file is fairly heavy, ticking the "Simplify" setting under "Render Properties" will
    make everything much faster and easier for posing and moving things around. 
    
    4. Freestyle has been set to "Absolute" line thickness mode (found in "Render Properties"). 
    If you change the render resolution, zoom in, zoom out, etc. you will need to adjust the Line
    Thickness.
    
    I hope you enjoy! If you have any questions, feel free to contact me on discord (rukikuri#1068)
    or on Twitter @rukikuri. 
    
    - Ruki        CC BY 4.0